From .162" diameter down to .009" diameter
(Only available with bright clean finish)
From .050" diameter down to .015" diameter
From .010" x .020" to .080" x .160"
Radius on the edge produced to customer's requirements when necessary.
From .015" Square to .125" Square
Radius on the corners produced to customer's requirements when necessary.
From .010 x .030" to .070" x .210"
Radcliff considers material with a 3:1 ratio or less rectangular
Radius on the corners produced to customer's requirements when necessary.
From .005" x .015" to .062" x .250" or .093" x .187"
Radcliff considers material with a 3:1 ratio or greater flat
(Maximum wire width is .250" - as width is decreased, thickness may be increased.)
From .013" x .016" to .135" x .170"
Exact radius and angles produced to customer requirements.
From .020" to .170"
Shaped to either equilateral or isosceles.
Produced to customer requirements.
From .010" x .020" to .120" x .170"
A quadrilateral shape having two parallel and two non-parallel sides.
Produced to customer print design.
From .015" x .020" to .100" x .140"
Produced to customer print design.
Radcliff Wire can create tooling to product special shaped wire to fill your unique requirement. If you have a drawing - we can produce it.
Previously produced special shapes include:
Flat side with very minimum radius at the corners
Flat side with a larger radius at the corners
No flat on side, slightly sharp corner where arc meets flats
No flat on side. Arc blends into flats, eliminating sharp corners. Note: This edge available at slightly higher cost
A finish without luster, produced by rolling on rolls that are fabricated to give a specific finish. This finish is especially suitable for applying various surface coatings.
A finish produced by rolling on rolls having a moderately smooth finish. It is suitable for many requirements, however it is not generally applicable for plating.
This finish is generally of high luster produced by selective rolling practices, including the use of specially prepared rolls. No. 3 finished is the highest quality finish produced and is particularly suited for electroplating.
Email: sales@radcliffwire.com
Phone: (860) 583-1305
Fax: (860) 583-6553
97 Ronzo Road
PO Box 603
Bristol, CT 06011-0603